China solar street lamp controller equipment manufacturers and suppliers - Smart pole net

产品知识 2020-09-03 关键词:Solar Street Light Controller Equipment,China,Manufacturer,Supplier,Factory,Made in China,Advanced,High Quality,Buy,Quality,Price,Price list,Offer

WLP-3110L solar street light controller product features:

1. Wireless communication

2. Suitable for 12V/24V input voltage

3. It can control most of the mainstream power controllers in China through infrared communication

4. Remote control and information reading through the computer interface and wechat mini program on the mobile phone

5. You can switch the load remotely to adjust the power of the load

6. Read the load/voltage/current/power inside the controller

7. Fault alarm, load fault alarm

8. Remotely deliver and read the parameters of multiple or a single controller

9. The module has the base station positioning function

10. Support remote firmware upgrade

WLP-3110L solar street light controller connection mode:

For safety, please follow the wiring sequence of load, battery and photocell. The antenna should avoid direct contact with metal (including shielded functional items) and cannot be placed in a completely closed iron container. In addition, the installation should be fixed firmly, and avoid scratches and insulation damage to the line.

a) Connection load

At this time, the controller has not started to work, and the controller has no response after the connection is completed.

b) Connect batteries

Before connecting the battery, ensure that the battery voltage is higher than 9V to start the controller. If the system is 24V, ensure that the battery voltage is not lower than 18V. After the battery is connected, the controller starts to work.

c) Connect the optical panel

The controller can also be used for 12V or 24V standard solar modules, and can also be used for solar modules whose open circuit voltage does not exceed the specified maximum input voltage. The maximum power point voltage of the solar module should not be lower than the battery voltage.

d) The controller and module are connected by RJ12 jumper to complete communication and power supply without additional power supply.

e) Connect the antenna

Fix the antenna on the housing and connect the appliance through the antenna extension cable.